KTA38-M0-850 Marine Engine

CCEC KTA38-M0-850 (1800 RPM) Marine Main Engine is V Type 12-cylinder, 38 liters four-strokes engine with 159 mm (6.25 in) bore and 159 mm (6.25 in) stroke.

KTA38-M0-850 Marine Main Engine equipped with CMS PT Fuel System, comes with turbocharger, this marine diesel engine complies with IMO-NOx requirements of the International Maritime Organization (IMO). The continuous power at 1800 RPM of CCEC KTA38-M0-850 Marine Main Engine is 850 HP (634 kW). The maximum torque of the engine at 1500 RPM is 3587 N.m.

Based on standard CCEC marine main engines, SeaMac provides both heat exchanger cooling and keel cooling marine main engines, we also provide complete propulsion system that including marine engine, gearbox, shaft, propeller as complete power system.

SeaMac provides full life cycle services for all our customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

All of CCEC marine main engine are comes with dry type exhaust system, which means dry type exhaust manifold and dry type turbocharger, SeaMac provides upgrading services for water-cooled exhaust system, which modify dry type exhaust system into water-cooled exhaust system, which are quite important and often requested by passenger boat projects.

Advantages of CCEC KTA38-M0-850 Marine Engine

The cylinder block and cylinder head adopt integrated design, which prevents the occurrence of water leakage and oil leakage, and greatly reduces the failure rate. The application of strengthened cylinder liners and chrome-plated piston rings improves the durability of the engine and prolongs the life of the engine.
It meets the requirements of China Inland River 1, China Inland River 2, and IMO TIER2 stage emission regulations, and adopts the BHT3B supercharger optimized by Chongqing CMI for marine engines. and emissions, while enhancing engine reliability.
With high injection pressure, overspeed protection, low-pressure fuel supply, fewer pipelines, and low failure rate, it can ensure full fuel combustion and achieve high-efficiency energy-saving effects. The equipped ESTC electronic oil timing control valve can accurately supplement and adjust the timing and improve the combustion smoke color at low idle speed.
The design of the exhaust system of Chongqing CMI marine engine is reasonable, and the water-cooled supercharger and water-cooled exhaust pipe can better reduce the surface temperature of the engine and meet the requirements of SOLAS safety regulations.

Technical Specifications

Basic Introduction of CCEC KTA38-M0-850 Marine Main Engine

Engine Model:	KTA38-M0-850
Engine Type:	V-12 Cylinders / 4 Stroke / 4 Valve
Displacement:	38 L
Rated Power / Speed:	850 HP @ 1800 RPM
Aspiration Method:	Turbocharged / Jacket Water Aftercooled
Emission Standard:	Euro III
*Bore Stroke:**	159 mm * 159 mm
*Packing Size(L W * H):**	2210 mm * 1320 mm * 1651 mm
Dry Weight:	4218 kg
Lead Time:	15-30 Working Days
Payment Terms:	T / T ,L / C

Coming Soon

Engine Model	Advertised Power	Aspiration	Compression Ratio	Fuel System
K38-M800	596 kW (800 HP) @ 1800 RPM	Turbocharged / LTA	14.5 : 1	PT (V.S/AFC)
K38-M900	671 kW (900 HP) @ 1600 RPM	Turbocharged / LTA	14.5 : 1	PT (V.S/AFC)
K38-M1000	746 kW (1000 HP) @ 1800 RPM	Turbocharged / LTA	14.5 : 1	PT (V.S/AFC)
K38-M1100	821 kW (1100 HP) @ 1800 RPM	Turbocharged / LTA	14.5 : 1	PT (V.S/AFC)
KT38-M600	448 kW (600 HP) @ 1800 RPM	Turbocharged	15.5 : 1	PT
KT38-M780	582 kW (780 HP) @ 1800 RPM	Turbocharged	15.5 : 1	PT
KT38-M800	596 kW (800 HP) @ 1800 RPM	Turbocharged	15.5 : 1	PT
KTA38-M900	671 kW (900 HP) @ 1800 RPM	Turbocharged & Water – Air Intercooler	15.5 : 1	PT
KTA38-M0-850	634 kW (850 HP) @ 1800 RPM	Turbocharged / Jacket Water Aftercooled	13.9 : 1	PT
KTA38-M1-1000	746 kW (1000 HP) @ 1800 RPM	Turbocharged & Water – Air Intercooler	15.5 : 1	PT
KTA38-M2-545	407 kW (545 HP) @ 1800 RPM	Turbocharged & Water – Air Intercooler	13.9 : 1	PT
KTA38-M2-1200A	895 kW (1200 HP) @ 1800 RPM	Turbocharged & Water – Air Intercooler	13.9 : 1	PT
KTA38-M2-1200B	895 kW (1200 HP) @ 1800 RPM	Turbocharged / Jacket Water Aftercooled	13.9 : 1	PT
——END——

General Information of CCEC KTA38-M0-850 Marine Main Engine
Engine Model	KTA38 – M0 – 850	Configuration	D233034MX02
Curve No.	M – 6219	CPL Code	2915
Displacement	2301 in3 / 38 L	*Bore Stroke**	159 mm * 159 mm / 6.25 in * 6.25 in
Fuel System	PT	Cylinders	12
Advertised Power	634 kW (850 HP) @ 1800 RPM	Aspiration	Turbocharged / Jacket Water Aftercooled
Rating Type	Continuous Duty	Rated Engine Torque	2480 lb.ft / 3363 N.m
Peak Engine Torque @ 1500 RPM	2646 lb.ft / 3587 N.m	Brake Mean Effective Pressure	163 PSI / 1121 kPa
Indicated Mean Effective Pressure	N / A	Maximum Allowable Engine Speed	2375 RPM
Maximum Torque Capacity from Front of Crank2	3202 lb.ft / 4341 N.m	Compression Ratio	13.9 : 1
Piston Speed	1875 ft/min / 9.5 m/sec	Firing Order	1 – 6 – 5 – 2 – 3 – 4 – 6 – 1 – 2 – 5 – 4 – 3
Normal Idle Speed Variation	± 25 RPM	High Idle Speed Range Minimum	1815 RPM
Weight (Dry) – Engine Only – Average	9300 lb. / 4218 kg	Weight (Dry) – Engine With Heat Exchanger System – Average	10005 lb. / 4538 kg
Weight Tolerance (Dry) Engine Only	10.5 3xStd Dev( ± %)	Default Droop Value	6 %
Minimum Droop Allowed	N / A	Maximum Droop Allowed	N / A
High Speed Governor Break Point	1860 RPM	Minimum Idle Speed Setting	650 RPM
Normal Idle Speed Variation	± 25 RPM	High Idle Speed Range – Minimum	1860 RPM
High Idle Speed Range – Maximum	1972 RPM
——END——

Performance Curve CCEC Cummins kta38-M0 Marine Main Engine

System Technical Data of CCEC KTA38-M0-850 Marine Main Engine
Fuel System	Avg. Fuel Consumption – ISO 8178 E3 Standard Test Cycle	30.6 GAL/hr / 115.9 L/hr
	Fuel Consumption at Rated Speed	42.8 GAL/hr / 162.1 L/hr
	Approximate Fuel Flow to Pump	86.0 GAL/hr / 325.5 L/hr
	Maximum Allowable Fuel Supply to Pump Temperature	140 °F / 60 °C
	Approximate Fuel Flow Return to Tank	43.2 GAL/hr / 163.4 L/hr
	Approximate Fuel Flow Return to Tank Temperature	155 °F / 68.4 °C
	Maximum Heat Rejection to Drain Fuel	2.4 kW / 135 BTU/min
	Fuel Transfer Pump Pressure Range	N / A
	Fuel Pressure – Pump Out / Rail Mechanical Gauge	138 PSI / 951 kPa
	Fuel Pressure – Pump Out / Rail Insite Reading	142 PSI / 979 kPa

Air System	Intake Manifold Pressure	44 in. Hg / 149 kPa
	Intake Air Flow	2126 CFM / 1003 L/sec
	Heat Rejection to Ambient	4344 BTU/min / 76 kW

Exhaust System	Exhaust Gas Flow	4400 CFM / 2077 L/sec
	Exhaust Gas Temperature (Turbine Out)	729 °F / 388 °C
	Heat Rejection to Exhaust (Manifold)	N / A

	Emissions (in accordance with ISO 8178 Cycle E3)
	NOx (Oxides of Nitrogen)	9.40 g/kW·hr / 7.01 g/HP·hr
	HC (Hydrocarbons)	0.20 g/kW·hr / 0.15 g/HP·hr
	CO (Carbon Monoxide)	5.14 g/kW·hr / 3.83 g/HP·hr
	PM (Particulate Matter)	N / A

Cooling System	Sea Water Pump Specifications	MAB 0.08.17 – 07 / 16 / 2001
	Pressure Cap Rating (With Heat Exchanger Option)	15 PSI / 103 kPa
	Max. Pressure Drop Across Any External Cooling System Circuit	5 PSI / 34 kPa

	Engines without Low Temperature Aftercooler (LTA) Jacket Water Aftercooled Engine (JWAC)
	Coolant Flow to Engine Heat Exchanger	335 GAL/min / 1268 L/min
	Standard Thermostat Operating Range (Start to Open)	180 °F / 82 °C
	Standard Thermostat Operating Range (Full Open)	202 °F / 95 °C
	Heat Rejection to Engine Coolant3	23746 BTU/min / 417 kW
——END——

Scopes of Supply of CCEC KTA38 – M0 – 850 Marine Main Engine
Exhaust System	1. Silencer	Lubricating System	1. Oil Pump
	2. Bellows		2. Oil Filter

Fuel System	1. Fuel Pump	Starting System	1. Starter Motor
	2. Oil Cut Solenoid Valve		2. Fywheel Housing
	3. Fuel Filter		3. Flywheel

Charging System	1. Alternator	Control System	1.Stadnby Control Panel

Cooling System	1. Seawater Pump
	2. Heat Exchanger
——END——

Optional Accessories of CCEC KTA38 – M0 – 850 Marine Main Engine
Exhaust System	1. Silencer	Power System	1. Battery

Fuel System	1. Float Fuel Tank	Cooling System	1. Radiator
	2. Oil – Water Separator		2. Cooling Fan
	3. Manual Fouling Pump		3. Sea Water Pump
	4. Fuel Inlet and Outlet Hose		4. Heat Exchanger

Remote Control System	1. Sea Water Pump
	2. Heat Exchanger

——END——

Committed to providing reliable premium propulsion system and power system for all kinds of ships around the world, SeaMac is a sub-brand of EMAC group that focused on maritime application. SeaMac’s ranges of products mainly inclduing marine main engine, marine gearbox, marine propellers, marine control lever system, marine auxiliary engine, marine generator set and emergency generator set.
For more information of our marine proplusion and power system products, you are welcome to visit SeaMac homepage: www.seamac.com

Modifiable components of CCEC KTA38 – M0 – 850 Marine Main Engine
Air Intake System	1. Installation Position of Air Filter	Starting System	1. 12 V Starter Motor for 12 V Electric System
Air Intake System	2. Upgrade to Heavy – Duty Type Air Fitler	Starting System	2. Upgrading to Specified Brand and Speicifications of Starter Motor

Exhuast System	1. Can Modify Installation Position and Direction of Turbocharger	Charging System	1. 12 V Charging Alternator for 12 V Electric System
	2. Water – Cooled Exhuast Manifold		2. Explosion – Proof Charging Alternator
	3. Water – Cooled Turbocharger		3. Upgrading to Specified Brand and Speicifications of Charging Alternator

Fuel System	1. Upgrade to Fuel Fitler That Integrated With Fuel Transfer Pump and Fuel Pre – Hearter	Engine Auiliary Accessories	1. Additional Auxiliary Systems Can Be Added for Special Applications

Engine Shut-Down System	1. 12 V Solenoid for 12 V Electric System	Cooling System	1. Can Modify Engine Into Keel Cooling System
Engine Shut-Down System	2. Explosion – Proof Solenoid	Cooling System	2. N / A

Lubricating System	1. Oil Pan Position	Power Output System	1. Can Modify Size of Flywheel Housing and Flywheel.
	2. Number of Dipstick		2. Dual – Ear Flywheel Housing (for Twin – Starter System)
	3. Position of Dipstick Can Choose From 6 Positions		3. Some of Models Can Modify Flywheel Housing Into Pto Integrated Type
	4. Can Modify Oil Filter to Be Remote Installation		4. Engine Have Connecting Port of Ptos, That Able to Provide Power Output

Engine Mounting System	1. Can Modify Engine Mouting Bracket
——END——